Crystal Vision
Control Descriptions
Audio Status
Displays presence of embedded audio groups.
Group 1 – 4 Present
On when embedded audio group is present in video.
Video Settings Menu
Video Delay
These controls set the length of the delay period in seconds, frames, lines and pixels. The
maximum delay that can be achieved varies from 0.4 seconds to 110 seconds depending on the
ViViD 3G model used and the input video standard. VisionWeb recognises the ViViD model fitted
and adjusts the maximum delay to five seconds for 3G and 3GS models and 110 seconds for 3G-
20 and 3GS-20. The maximum delay that can be set by the controls is auto limited according to
the video standard. In the example below the maximum delay is just over five seconds which is
the most achievable for the ViViD 3G model with an SD 625 line input.
Seconds, Frames,
Lines, Pixels Delay
Use these controls to set the variable delay from 0 to the
maximum possible for the ViViD 3G model used. Note that the
maximum delay value may not be achievable with all input
video standards. See ‘Video Delays in ViViD 3G’ on pages 6-7.
ViViD 3G User Manual R1.4
25
19 January 2021