Crystal Vision
Appendix 1
9 Appendix 1
Statesman
Introduction
The Crystal Vision Statesman PC control software was designed to control a range of Crystal
Vision modules via Ethernet control from a PC. ‘VisionWeb’ is now the preferred method of
PC control for Crystal Vision rack-frame products. Statesman provided a user friendly means
of configuring and operating Crystal Vision modules with the benefit of “see-at-a-glance”
status monitoring.
The main Statesman application communicates with each module in a frame through a
Statesman-capable front panel CPU or full active control panel. Either of these must be fitted
to allow Statesman control.
Statesman operation
The initial view will show an Explorer style view of the connected frames and modules.
Double clicking on a module will enable the display of the main application menus.
The two large control panes shown in the upper and lower halves of the window may display
different menus for the same card, or controls for different cards. Click on the horizontal
button-bar between the two panes to close the lower pane or drag the button to vary the size
of the panes.
TANDEM 320 User Manual R1.3
49
11 July 2019
