Crystal Vision
Control and status monitoring
8 Control and status monitoring
8.1 Card edge controls
Q-Down 3G range board edge (Q-Down-ATG 3G model shown)
Board edge control was removed from Q-Down-AG 3G and Q-Down-ATG 3G in
2018. Therefore the card edge control information detailed below is only relevant for
older versions of the product.
8.2 Card edge buttons
The two tactile push button switches allow the operator to navigate within the menu
structure.
.
Button
Function
Normal state Up, Action Down
Up Menu
Push to jump up a menu level or cancel a selection
ENTER
Select/Action
Push to select a menu and to action and confirm a change
8.3 Card edge rotary control
The board edge rotary encoder is used to navigate through the menu categories and
adjust parameter values.
Control
Function
SCROLL
/ADJUST
Rotate SCROLL to identify a menu category. In combination with the ENTER
button select and ADJUST to change the current level or select a further option.
Notes:
The rotary control can access menus and parameter values by
clockwise or anti-clockwise rotation.
Q-Down-AG 3G/ATG 3G User Manual R2.1
19
11 July 2019
