Crystal Vision
VisionWeb
Configuration / SNMP
Access this window by clicking the link on the ‘Options’ page. Indigo SNMP enabled frames can
control and report status of cards, PSUs and frames. SNMP traps can be used to trigger alarms
– for example, say, when a signal has been removed, video standard changed or any of the
many monitored status variables changed. The SNMP window can be edited and changes
applied by clicking on ‘
Set’
.
Indigo SNMP enabled front panels use the Net-SNMP agent and a Crystal Vision XML Schema
Definition document to control its operation and the management information provided. The
user-configurable SNMP configuration window easily allows the user to:
•
Edit the list of configuration files.
•
Program the IP and port address of the destination SNMP Manager.
•
Enable or disable individual trap events individually by OID.
•
Select SNMP v1 or v2 operation.
An optional SNMP licence must be purchased to enable control and monitoring via SNMP.
The full list of available XML commands is contained within the Schema Definition document
CrystalVision.xsd
available from Crystal Vision.
Indigo ‘SNMP’ configuration page
The SNMP agent can also be accessed via FTP –
see section
.
Indigo 1 User Manual R1.14
37
27 February 2020
