Crystal Vision
Hardware installation
28
DEC101SUser ManualV1.0 05/11/03
RM02
Modular rear connectors
Description
RM02 (ZLA00128 artwork)
•
9 DEC101S modules per
FR2AV or 2U Indigo frame
•
3 modules per rear connector
•
All connections available
•
Card 1 fits in slots 1, 5 and 9
•
Card 2 fits in slots 2, 6 and 10
•
Card 3 fits in slots 4, 8 and 12
•
No card fits in 3, 7 or 11
Note:
Three DEC101S cards can be fitted to each RM02 rear module.
Card 1 fits in the top position, card 2 in the second from the top and card 3 fits in the lowest
slot position. No card is fitted in the third from top slot.
For details of fitting rear connectors please refer to the appropriate frame manual.
BNC_U
BNC_1
Function
A
IN
Serial Digital Output (1).
B
1
Serial Digital Output (2)
C
2
Analogue Composite Video or C input.
D
3
Not used, connected to frame ground
E
4
Analogue Y plus sync input (active in Y/C input mode only)
F
5
Composite Sync Loop through (set by J1)
G
6
Not used, connected to frame ground
H
7
Not used, connected to frame ground
I
8/IN2
Composite Sync (B & B) input
Note:
BNC_U refers to ZLA00128 universal artwork labeling.
BNC_1 refers to ZLA00110 artwork used when the RM02 is supplied with other products.
There are no GPI connections for the DEC101S