5- 2
Side Panel Removal
1. Remove Drip Tray by pulling outwards from the body (Figure 5-2-1).
2. Using a Philips screwdriver, remove the screw from the lower front panel (located behind
Drip tray assembly location)(Figure 5-2-2).
3. Pull outwards on the lower front panel to disengage locking tabs from the front of the cooler
(Figure 5-2-3).
4. Remove the 2 side panel installation screws from the front of the cooler (located mid way up
the front panel) (Figure 5-2-4).
Figure 5-2-1
Figure 5-2-2
Figure 5-2-3
Figure 5-2-4
