PARTS
OPERATION
Charge the battery fully before starting to work. The lamp is then ready for use.
1.
Connect the charging cable to the lamp charging socket.
2.
Connect the charging unit to the 230 V mains supply or the vehicle charging cable to a 12 V vehicle charging
socket.
Charge control lamp
When the lamp is in use:
Red:
LED remains lit as a control function so that the light is not unintentionally left on when
the unit is folded together.
Charging LED:
Red:
Battery is being charged.
Green:
Battery is fully charged.
Press ON/OFF switch repeatedly to choose the desired function. Functions are in the following order:
Spotlight > 40 LED > 80 LED > OFF.
Notice:
When the charger cable is connected to the charging socket, the lamp is immediately switched off. Once the
charging cable is removed, the lamp resumes its last selection (Spotlight, 40 LED, 80 LED or OFF).
The surface lamp can be attached to ferromagnetic surfaces with the magnets.
Note:
All three magnets must have simultaneous contact so that the lamp is securely held and does not fall down.
1.
Surface lamp
2.
Spotlight
3.
ON/OFF switch
4.
Charge control lamp
5.
Charging socket
6.
Magnet holder
7.
12 V vehicle charging cable
8.
230 V charging unit
