![background image](http://html.mh-extra.com/html/crux/rvcch-75/rvcch-75_manual_2691584001.webp)
RVCCH-75
Rear View with VIM Integration Interface and Lip Mount Camera
for Chrysler, Dodge & Jeep Vehicles with MyGig Radio
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, C
A
91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.021120
1 of 3
•
Activates Mygig radio for enabling video features.
•
Spare tire mount camera included.
•
Interface includes Audio / Video Input to connect an extra A/V source.
•
Automatically switches to Rear-view when car is in Reverse mode.
•
Supports vehicles with manual transmission but does not 12V Reverse Trigger. Camera power
must be tapped from the +12V reverse light wire instead.
•
Plug & Play Installation.
PRODUCT FEATURES:
PARTS INCLUDED:
RVCCH-75 Module
RVCCH-75 Harness
CUL-03 Lip Mount Camera
INSTALLATION DIAGRAM:
WHITE Wire
Parking Guideline
DP
ON
DIP
SWITCH
LED*
*LED RED = Power ON Status
LED BLUE = Data Bus ON Status
Regulator
20 Ft. Coax Cable
8-Pin Molex
Represents Solder Joint
TO RADIO
WHITE
22-PIN
(MALE)
GRAY
22-PIN
(MALE)
WHITE
22-PIN
(FEMALE)
GRAY
22-PIN
(FEMALE)
TO FACTORY
HARNESS
GREEN WIRE
ACTIVATE VIDEO BYPASS
A/V OUT
A/V INPUT
To Source Ground
(ground wire)
(not chassis ground)
WHITE Wire*
(Camera Power Output
+12V 250mA)
RED Wire
Tape Off
(Not Used)
CUL-03 Camera
Included
*White wire does not supply Reverse Trigger on Manual Transmissions.
Camera power must be connected to factory reverse light wire instead.