14.
Remove four (4) 7mm screws securing
factory radio chassis
(Figure 13).
Note:
The removal of the display and
module is required to remove radio chassis.
The wiring harnesses are very short and are
difficult to disconnect. Use the following
steps to disconnect.
15.
Remove four (4) 7mm screws securing
display
to dash. Disconnect harness and
remove display (Figure 14).
16.
Remove three (3) 7mm screws securing
module
to sub-dash. Lift module,
disconnect harnesses on radio chassis and
remove chassis (Figure 15).
019 0021
Factory Radio Removal
(continued)
4
FIGURE 13
FIGURE 15
Copyright 2018 Crutchfield Corporation
1-800-955-9094
TECHNICAL SUPPORT
Factory Radio Chassis
Factory Radio Chassis
Display
Display
Module
Module
(2 of 3 screws shown)
(2 of 3 screws shown)
FIGURE 14