Tools Needed:
(depending upon vehicle)
000PERIG
Revision 3/9/05
▲
®
Copyright 2005 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items received. Carefully check through packaging material. If
any item is missing, please call:
Crutchfield Customer Service at 1-800-955-9091
Peripherals Installation Guide
A note about wiring:
In addition to the tools listed, your
peripheral installation may require power and ground wiring,
plus RCA cables, terminals, and a remote turn-on lead. The
easiest way to get all of these items is in an amplifier wiring
kit, available at crutchfield.com.
Flat Blade
Screwdriver
Phillips
Screwdriver
Panel Tool
Pliers
Drill & Bit Set
Utility Knife
Wire Stripper/
Crimp Tool
Torx Driver Set
Socket &
Ratchet Set
Although reasonable attempts are made to verify the accuracy of the information
contained in this guide, it is presented without warranties or guarantees of any
type due to the constantly changing nature of this type of information and running
changes in vehicle production. Any person or entity using this information does so
at his or its own risk. If you find that our instructions do not apply to your vehicle,
or if you have questions, do not continue with your installation. Contact our toll-
free technical support for assistance (Tech phone number is on your invoice).
As with any car audio/video installation, your first
step is to disconnect the negative terminal of your car
battery to prevent short circuits. Check your MasterSheet™ (if
available) or vehicle owner’s manual for specific directions. In
some vehicles, disconnecting the battery may require you to
re-enter a security code or have the dealer reset the internal
computer.
!
*000PERIG*
