21 |
P a g e
4-20 mA MODULE:
Allows for a 4-20mA
signal transfer of the UV output to a remote
device such as a data logger or computer. Simply
plug the supplied cable into any female IEP
connections. Two screw terminals are supplied to
connect the wire that leads to the receiving end
of the signal. As the distance required is
unknown, no wire is supplied with this system,
however 16-22 AWG is required.
ETHERNET MODULE:
Allows for all
controller functions to be connected to a
computer via an Ethernet cable. This module is
currently in development and is not available at
this point-in-time.
Warranty Registration
It is imperative that you complete the warranty registration process. This not only registers your UV
disinfection system for the provided manufacturer’s warranty, but also allows the factory to
provide you with any important product updates or technical bulletins concerning your product.
The registration process is a simple process by filling out the attached warranty card. Please ensure
that ALL information is filled in, including a valid e-mail address.
PLEASE NOTE:
This information is
for the sole purpose of technical support for your disinfection system and will not be used, or sold,
to any other organization for any other purpose.
