Section 4
4-16
430 Sports Coupe
DC Panel Circuit Breaker Functions
DC Circuit Breaker
Function
DC MAIN
Put the breaker in the ON position to connect power to rest of the circuit breakers on the panel except the bilge
pumps and the CO detectors. The automatic bilge pump circuit breakers are mounted on the AUTOMATIC
BILGE PUMP C.B. PANEL located in the engine room. If any of the breakers are tripped, the white button
popped out, reset them immediately. The CO detectors, sump pumps and accessories memory settings circuit
breakers are connected to +12V DC, which is switched ON and OFF at the house battery switch. The CO
DETECTORS and SHOWER SUMPS circuit breakers should be reset immediately if they are tripped.
CAUTION: If the house battery switch is OFF, the CO detectors are NOT ACTIVE. There is no CO
detector warning if the house battery switch is OFF.
LIGHTS FSR
Put the circuit breaker in the ON position to connect power to the forward stateroom light switches.
LIGHTS ASR
Put the circuit breaker in the ON position to connect power to the aft stateroom light switches.
LIGHTS SALON
Put the breaker in the ON position to connect power to the salon and dinette light switches.
LIGHTS GALLEY
Put the breaker in the ON position to connect power to the galley light switches.
LIGHTS FWD HEAD
Put the breaker in the ON position to connect power to the forward head light switch.
LIGHTS AFT HEAD
Put the breaker in the ON position to connect power to the aft head light switch.
PUMP FWD HEAD
Put the breakers in the ON position to connect power to the forward head pump. Power to the pumps must be
ON or the electrically controlled VacuFlush heads will not flush.
PUMP AFT HEAD
Put the breakers in the ON position to connect power to the aft head pumps. Power to the pumps must be ON
or the electrically controlled VacuFlush heads will not flush.
STEREO / TV / DVD
CKPT
Put the breaker in the ON position to connect power to the cockpit stereo, TV and DVD player.
STEREO / TV ANT /
DVD SALON
Put the breaker in the ON position to connect power to the salon stereo, TV antenna amplifier and DVD player.
EPLEX SYSTEM
Put the circuit breaker in the ON position to connect power to the EPLEX PDM module.
REFRIG SALON
Put the breaker in the ON position to connect power to the salon refrigerator.
CKPT FRIG / SPARE
Put the breaker in the ON position to connect power to the galley refrigerator.
CKPT WD / SPARE
Switch the breaker ON to connect power to the cockpit refrigerator, if equipped. If not equipped, this breaker is
a spare for future use.
MACERATOR /
SPARE
Put the breaker in the ON position to turn on the macerator, if equipped. If not equipped, this breaker is a spare
for future use.
Downloaded
from
CruisersOwnersForum
http://www.CruisersOwnersForum.com
