4-11
41 Cantius
Basic Systems Operation
DC Panel Circuit Breaker Functions
DC Circuit Breaker
Function
DC MAIN
Put the breaker in the ON position to connect power to the rest of the circuit breakers on the panel except the
bilge pumps and the CO detectors. The automatic bilge pump circuit breakers are mounted on the AUTOMATIC
BILGE PUMP C.B. PANEL located in the engine room. If any of the breakers are tripped and the white button
popped out, reset them immediately. The STEREO MEM, SHOWER SUMPS and CO DETECTORS circuit
breakers are connected to +12V DC, which is switched ON and OFF at the house battery switch. The CO
DETECTORS and SHOWER SUMPS circuit breakers should be reset immediately if they are tripped.
CAUTION: If the house battery switch is OFF, the CO detectors are NOT ACTIVE. There is no CO
detector warning if the house battery switch is OFF.
LIGHTS FSR
Put the breaker in the ON position to connect power to the forward stateroom light switches.
LIGHTS ASR
Put the breaker in the ON position to connect power to the aft stateroom light switches.
LIGHTS SAL /
STEPS
Put the breaker in the ON position to connect power to the salon and step light switches.
LIGHTS GALLEY
Put the breaker in the ON position to connect power to the galley light switches.
LIGHTS FWD HEAD Put the breaker in the ON position to connect power to the forward head light switch.
LIGHTS AFT HEAD
Put the breaker in the ON position to connect power to the aft head light switch.
PUMP FWD HEAD
Put the breaker in the ON position to connect power to the forward head pump. Power to the pump must be ON
or the electrically controlled VacuFlush head will not flush.
PUMP AFT HEAD
Put the breaker in the ON position to connect power to the aft head pump. Power to the pump must be ON or
the electrically controlled VacuFlush head will not flush.
FSR / ASR
STEREO / DVD
Put the breaker in the ON position to connect power to the forward and aft stateroom stereo and the DVD
player.
SALON
STEREO / DVD
Put the breaker in the ON position to connect power to salon stereo and the DVD player.
TV ANTENNA
Put the breaker in the ON position to connect power to the TV antenna amplifier.
REFRIGERATOR /
GALLEY
Put the breaker in the ON position to connect power to the galley refrigerator.
MACERATOR /
SPARE
Put the breaker in the ON position to turn on the macerator, if equipped. If not equipped with a macerator, this
breaker is a spare for future use.
PUMP FRESH
WATER
Put the breaker in the ON position to turn on the freshwater pump and the freshwater tank gauge. The pump
will turn on automatically when a freshwater demand is actuated, i.e., opening a faucet, and will run at the speed
required to maintain water flow.
Downloaded
from CruisersOwnersForum
http://www.CruisersOwnersForum.com
Summary of Contents for 41 Cantius
Page 1: ......
