Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800
www.CRU-DataPort.com
DataPortable 525 FireWire 800
USB/eSATA to SATA
Installation Guide
Step 1. Firmly push the rear tabs in towards the center of the
enclosure. Slide the metal cover off the back of the
enclosure. If you are installing a 5.25” device remove
the front bezel insert.
Step 2. Connect the power and data connector to your SATA
device.
Step 3. For 5.25” devices use the provided screws in the side
mount holes to secure it. For 3.5” devices use the pro-
vided screws in the bottom mount holes to secure it.
Step 4. Slide the top cover onto the enclosure. Press the rear
tabs out to secure the cover.
Connect the DataPortable 525 to an available FireWire 800, USB,
or eSATA port. No new drivers are required. The hard disk drive
will be found and a window will pop up stating that new hard-
ware has been detected. If the drive has previously been format-
ted the drive will be accessible through My Computer on PCs and
from the desktop on Macs. Please read your host bus adaptor
manual for details on hard drive operation and removal.
If your computer does not have an available eSATA port you may
use the provided SATA host to eSATA Connector Bracket.
