Croydex MM710100E Manual Download Page 1

Thank you for purchasing this Croydex product.  Please follow the fixing and care instructions to ensure that 

your product is fitted safely and that it retains its high quality finish. Please retain this leaflet for future 

reference.

This instruction leaflet applies to the following products:

MM710100E  INPUT: 220-240V AC 17W IP 44

MM710200E  INPUT: 220-240V AC 26W IP 44

MM710300E  INPUT: 220-240V AC 26W IP 44

MM710400E  INPUT: 220-240V AC 17W IP 44

MM710500E  INPUT: 220-240V AC 42W IP 44

MM710600E  INPUT: 220-240V AC 27W IP 44

IMPORTANT INSTALLATION INFORMATION

THIS IS A CLASS 1 APPLIANCE AND MUST BE CONNECTED TO EARTH

        HAZARDOUS VOLTAGES INSIDE – DO NOT OPEN SEALED UNITS

THERE ARE NO USER REPLACEABLE PARTS IN THE MIRROR

In accordance with Statutory Instrument 2004 No. 3210 - The Building (Amendment) (No.3) Regulations 

2004, any work, other than repair/replacements, in a room where there is water (e.g. kitchen, bathroom, 

etc.) must be either:

• 

carried out by an electrician who is a member of a competent person self-certification scheme who 

will certify the work complies with the Building Regulations and you do not need to notify your local authority, 

or,

• 

carried out after prior notification to the Local Authority Building Control Department, which has 

responsibility for ensuring that the work is inspected and tested.

IMPORTANT WARRANTY INFORMATION

In accordance with Statutory Instrument 2004 No. 3210 - The Building (Amendment) (No.3) Regulations 

2004, the installer must give the occupier of the premises in which this product has been installed a 

certificate to confirm that the requirements of regulations 4 and 7 have been satisfied, or the installation of 

this product must be inspected and tested by the Local Authority Building Control Department who will issue 

a compliance certificate.

A copy of this certificate may be required for certain warranty claims.  Failure to provide a copy of the 

certificate may invalidate the warranty.

This does not affect your statutory rights

We recommend that you make yourself aware of the Regulations before you undertake any work and if you 

require clarification you should contact your Local Authority Building Control Department.

MIR 035 R02

Summary of Contents for MM710100E








Reviews: