Mist Stand Fan
MF-221
220-240V 50/60Hz 120W
General Safety Instructions:
1. Read the instructions carefully before starting to use the device. Save this instruction manual in a
convenient place for future reference.
2. Ensure that the voltage of the electrical outlet is compatible with the operating voltage shown on the
product: 220-240 V / 50/60 Hz.
3. Do not use the device if it is fully partly damaged in any way.
4. When the device stops working for any reason, you must not attempt to open it or repair it yourself.
Contact the manufacturer or its local agent or a qualified person authorized by the agent to do the
necessary repairs.
5. If any repair is required, and if the electric wire is damaged, it must be replaced only by the
manufacturer or its local service agent in order to avoid any risks that may cause bodily or material
harm.
6. Do not allow the electrical wire to touch wet or hot surfaces and do not place the wire in a twisted
manner causing obstruction.
7. Do not immerse the device or any of its components in water or other liquids to avoid an electric
shock.
8. The appliance must be completely disconnected from the electrical supply when not in use and when
cleaning and ensure that it is in "OFF" mode when not in use.
9. To disconnect the appliance from power, remove the plug from the electrical socket, please do not
pull the plug from the wire otherwise this will damage the plug or wire and cause serious damage.
10. Care should be taken when the device is used near the children and to ensure that children do not
play with the device.
11. This device is not intended to be used by persons (including children) with reduced physical, sensory
or mental abilities, or lack of experience and knowledge unless they were supervised and given
instructions on the use of devices by the person responsible for their safety.
