background image

XTi2.5 Series Power Amplifier

Obtaining Other Language Versions: 

To obtain information in another language about the use of this product, please 

contact your local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 

574

-

294

-

8000

.

This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possi-

ble situation which may arise during installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may 

have occurred. To obtain the latest version of this manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice: 

Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are 

the property of their respective owners.
Later versions of this manual and additional information about this product may be available at the Crown website at www.crownau-

dio.com.
Some models may be exported under the name Amcron®
©

2015

 by Harman International, 

1718

 W. Mishawaka Rd., Elkhart, Indiana 

46517

-

9439

 U.S.A. Telephone: 

574

-

294

-

8000

.

获得其它语言版本:

 

如果您需要其它语言版本的产品使用说明,请联系当地的

Crown

产品分销商。如果您

需要查询您当地的经销商以便获取帮助,请致电

574

-

294

-

8000

Crown

公司联系。

本手册未提供有关产品设计、生产和变更的所有详细信息,也未列举出在安装、运行或维护本产品时可
能出现的所有情况。

本手册里提供的信息在出版时为准确无误。然而,我们仍可能在出版本手册后更新相应内容。如果您需
要获取本手册的最新版本,请登录

Crown

的官方网站

www.crownaudio.com

本手册之后的更新版本可能在

Crown

官网下载

www.crownaudio.com

商标声明:

本手册中出现的

Crown

Crown Audio

Amcron

Harman International

的注册商标。其它商标为相应

公司的注册商标。

©

2015

 Harman International

出版所有。地址:

1718

 W. Mishawaka Rd., Elkhart, Indiana 

46517

-

9439

 U.S.A. 

电话号

码:

574

-

294

-

8000

Operation Manual

操作手册

XTi2.5

系列功率放大器

XTi 1002A

XTi 2002A

XTi 4002A

XTi 6002A

5055945

  

01

/

15

Summary of Contents for XTi 1002A

























Reviews: