background image

Power-Tech .1 Series

 Power Amplifiers

page 19

Operation Manual

YE

AR

3

SUMMARY OF WARRANTY

Crown International, 1718 West Mishawaka Road, 
Elkhart, Indiana 46517-4095 U.S.A. warrants to 
you, the ORIGINAL PURCHASER and ANY SUB-
SEQUENT OWNER of each NEW Crown product, 
for a period of three (3) years from the date of 
purchase by the original purchaser (the “warranty 
period”) that the new Crown product is free of 
defects in materials and workmanship. We further 
warrant the new Crown product regardless of the 
reason for failure, except as excluded in this War-
ranty.

ITEMS EXCLUDED FROM THIS 
CROWN WARRANTY

This Crown Warranty is in effect only for failure of 
a new Crown product which occurred within the 
Warranty Period. It does not cover any product 
which has been damaged because of any inten-
tional misuse, accident, negligence, or loss which 
is covered under any of your insurance contracts. 
This Crown Warranty also does not extend to the 
new Crown product if the serial number has been 
defaced, altered, or removed.

WHAT THE WARRANTOR WILL DO

We will remedy any defect, regardless of the rea-
son for failure (except as excluded), by repair, 
replacement, or refund. We may not elect refund 
unless you agree, or unless we are unable to pro-
vide replacement, and repair is not practical or 
cannot be timely made. If a refund is elected, then 
you must make the defective or malfunctioning 
product available to us free and clear of all liens 
or other encumbrances. The refund will be equal 
to the actual purchase price, not including inter-

est, insurance, closing costs, and other finance 
charges less a reasonable depreciation on the 
product from the date of original purchase. War-
ranty work can only be performed at our autho-
rized service centers or at the factory. Warranty 
work for some products can only be performed at 
our factory. We will remedy the defect and ship 
the product from the service center or our factory 
within a reasonable time after receipt of the defec-
tive product at our authorized service center or 
our factory. All expenses in remedying the defect, 
including surface shipping costs in the United 
States, will be borne by us. (You must bear the 
expense of shipping the product between any for-
eign country and the port of entry in the United 
States including the return shipment, and all 
taxes, duties, and other customs fees for such for-
eign shipments.)

HOW TO OBTAIN WARRANTY 
SERVICE

You must notify us of your need for warranty ser-
vice within the warranty period. All components 
must be shipped in a factory pack, which, if 
needed, may be obtained from us free of charge. 
Corrective action will be taken within a reason-
able time of the date of receipt of the defective 
product by us or our authorized service center. If 
the repairs made by us or our authorized service 
center are not satisfactory, notify us or our autho-
rized service center immediately.

DISCLAIMER OF CONSEQUENTIAL 
AND INCIDENTAL DAMAGES

YOU ARE NOT ENTITLED TO RECOVER FROM 
US ANY INCIDENTAL DAMAGES RESULTING 

FROM ANY DEFECT IN THE NEW CROWN 
PRODUCT. THIS INCLUDES ANY DAMAGE TO 
ANOTHER PRODUCT OR PRODUCTS RESULT-
ING FROM SUCH A DEFECT. SOME STATES DO 
NOT ALLOW THE EXCLUSION OR LIMITATIONS 
OF INCIDENTAL OR CONSEQUENTIAL DAM-
AGES, SO THE ABOVE LIMITATION OR EXCLU-
SION MAY NOT APPLY TO YOU.

WARRANTY ALTERATIONS

No person has the authority to enlarge, amend, or 
modify this Crown Warranty. This Crown War-
ranty is not extended by the length of time which 
you are deprived of the use of the new Crown 
product. Repairs and replacement parts provided 
under the terms of this Crown Warranty shall 
carry only the unexpired portion of this Crown 
Warranty.

DESIGN CHANGES

We reserve the right to change the design of any 
product from time to time without notice and with 
no obligation to make corresponding changes in 
products previously manufactured.

LEGAL REMEDIES OF PURCHASER

THIS CROWN WARRANTY GIVES YOU SPECIFIC 
LEGAL RIGHTS, YOU MAY ALSO HAVE OTHER 
RIGHTS WHICH VARY FROM STATE TO STATE. 
No action to enforce this Crown Warranty shall be 
commenced after expiration of the warranty 
period.

THIS STATEMENT OF WARRANTY SUPERSEDES 
ANY OTHERS CONTAINED IN THIS MANUAL 
FOR CROWN PRODUCTS.                 12/01

9 Warranty

UNITED STATES & CANADA

Summary of Contents for Power-Tech 1.1

























Reviews: