Rev. 1.0
FMX30/FMX100/FMX250 User’s Manual
2—8
Connect the RF load, antenna or the input of an external power amplifier, to the
type-N, RF output connector on the rear panel. VSWR should be 1.5:1 or better.
The RF monitor is intended primarily for a modulation monitor connection.
Information gained through this connection can supplement that which is available
on the transmitter front panel displays.
If your transmitter is equipped with the receiver option, connect the incoming RF
to the RF IN connector.
Warning
Severe shock hazard!
Do not touch the inner portion of the
RF output connector when transmitter
power is on.
Illustration 2–6 RF Connection
120Vac
RF Input Connector
(receiver option only)
RF Output
RF Output
Monitor
