Crowcon I-Test User'S Operation Manual Download

Page: 98 / 125

4.3.4 Setting Cylinder expiry date

For the selected cylinder profile the cylinder expiry date must be checked against the physical

cylinder to be connected to I-Test and, if necessary, adjusted.

From the Inlet Setup screen use the arrow keys to highlight the cylinder expiry date icon

Press the

key. The Cylinder Expiry Date screen

will be displayed.

Use the

and

keys to highlight the required number to set

Use the

and

keys to increase or decrease the value.

Repeat this to adjust all the relevant digits and press

when the adjustment is complete. The

expiry date will be set and the Inlet Setup screen will be redisplayed.

If whilst the Cylinder Expiry Date screen is displayed the adjustment is to be aborted, press the

key.

Figure 79: Cylinder Expiry Date screen

2012

13 May 2013 11:30:45

I-Test

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test

Manager

Configuring

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Search results

Summary of Contents for I-Test

Reviews:

Related manuals for I-Test

Brands by name

Popular brands

Crowcon I-Test, User'S Operation Manual

Search results

Summary of Contents for I-Test

Reviews:

Related manuals for I-Test

Brands by name

Popular brands