Crowcon I-Test User'S Operation Manual Download

Page: 115 / 125

115

10. Troubleshooting

Symptom

Cause

Action

No action is undertaken

when the monitor

is inserted and no

progress or result icons

appear on the screen.

The I-Test display is not showing

the home screen and is in a

functional menu.

USB to PC cable is still attached

to I-Test following configuration.

Navigate to the home screen,

remove the monitor, re-insert to

repeat test.

Remove USB cable from I-Test,

remove the monitor, re-insert to

repeat test.

I-Test Performs no test

when monitor is inserted

and display then shows

complete success icon

No test action has been selected.

Select a test, e.g. speedy bump,

via either I-Test Manager (see

page

) or via I-Test Front Panel

(see

page 99

), and then repeat

process.

I-Test Performs no test

when monitor is inserted

and display then shows

the

icon

The attached cylinder does not

contain the required gas for a

sensor within Gas-Pro that is due

a bump test.

The attached cylinder does not

contain the required gas for a

sensor within Gas-Pro that to be

calibrated.

Replaced the attached cylinder with

a cylinder containing the appropriate

test gases and reconfigure I-Test.

USB Flash Stick icon

is not available when

the USB Flash Stick is

inserted.

USB functionality is not available

when I-Test is operating on

backup battery.

Connect the power adapter to a

suitable mains outlet and connect

its DC connector to the power input

socket on the I-Test.

I-Test does not respond

when power switch is

operated to turn on the

unit.

DC power supply is not

connected and backup battery is

exhausted.

USB to PC cable is still attached

to I-Test following configuration.

Connect DC power supply and

power cycle I-Test

Remove USB cable from I-Test and

power cycle I-Test.

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test

Manager

Configuring

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Search results

Summary of Contents for I-Test

Reviews:

Related manuals for I-Test

Brands by name

Popular brands

Crowcon I-Test, User'S Operation Manual

Search results

Summary of Contents for I-Test

Reviews:

Related manuals for I-Test

Brands by name

Popular brands