19
Emergency Alerts
This feature of the system allows the user to immediately send an emergency alert according to the user's
emergency (can be preprogrammed by the installer according to the user's request). The system has 3
respective emergency alerts, each one activated by pressing of the A, B, C, D column two adjacent buttons
simultaneously.
The default emergency alerts are "Fire", "Medical" and "Panic".
How to initiate Panic Alarm
Press simultaneously on keys
<
C
>and <
D
>
To stop the alarm enter a valid user code
How to initiate Medical Alarm
Press simultaneously on keys
<
B
> and <
C
>
To stop the alarm enter a valid user code
How to initiate Fire Alarm
Press simultaneously on keys
<
A
> and <
B
>
To stop the alarm enter a valid user code
Generate Threat or Duress
If you are forced to disarm the system under threat, you must enter the duress digit before the
user’s code to activate the automatic dialer. The duress digit shifts up your usual code by one
digit. If your code is 345 and 8 is your duress digit, than entering 8345 modifies your code. The
modified duress code disarms the system in a normal way, but at the same time activates the
dialer silently to report a “duress event” without arousing suspicion. (For details ask the
installer).
Initiating Duress Alarm
Example:
Preprogrammed duress code = 2
Preprogrammed user 3 code = 3456
To perform duress alarm User should insert the following syntax –
<23456> ENTER
Disabling Duress Alarm
To restore duress alarm User should insert the user code –
<3456> ENTER
