16
Arming in the Latchkey Mode
If this option is enabled at installation phase and has been assigned to a specific user code, the
user will Arm the system in latchkey mode. This ARM type is useful for a message report that will
be sent, for instance, to a parent's mobile to inform him that his children have returned home
from school and have disarmed the system. Therefore this report is considered an alert and not
an alarm. This feature supports SMS and voice message PSTN/GSM protocols only, for the rest of
the protocols you receive the usual disarm message (user can check latchkey disarm in "view
memory")
By User Code
1. Enter your
code
. (Ask your installer for the latchkey mode user code)
2. Press
<ENTER>
.
The
indicator displays on LCD indicating that the system is now armed in Arm mode.
How to Arm Partitions (if enabled at the installation)
The protected area can be grouped into 4 separate partitions (1, 2, 3, and 4). The system can be
grouped for User‘s convenience to separate, in a business environment, the offices from the
warehouse area, or in a private residence, the different rooms of the home, e.g., living room,
bedroom, etc.
To arm partition 1 enter user code for partition 1
To arm partition 2 enter user code for partition 2
To arm partition 3 enter user code for partition 3
To arm partition 4 enter user code for partition 4
Note
: To ARM partition with code see page
1
2 “How to arm the system before exit”
To disarm partition, see "Disarming the System" on page 14.
