Crosswater Waldorf US-WF130 Installation Instructions Download Page 1

Installation Instructions

3

-5/8"

3

-1/4"

5

-1/2"

1

"

1” dia

2

-3/4"

2

-1/2"

1

/

2

”  NPSM

3

-5/8"

3

-1/4"

5

-1/2"

1

"

1” dia

2

-3/4"

2

-1/2"

1

/

2

”  NPSM

Adjustable

wrench

Channel

locks

Plumbers’ putty

or caulking

Flat head

screwdriver

Cross head

screwdriver

Hexagonal

key

Waldorf Widespread Basin Faucet

US-WF130

Introduction

Installation notes

The faucets in this range are single flow (hot and cold water mix in the 

body) and should therefore be supplied with hot and cold water at 

balanced pressures. If the faucets are not supplied at balanced 

pressures then the mixer will not function correctly.
The minimum water pressure required for these faucets is 

1.45

 psi. The 

maximum water pressure is 

72.5

 psi

 

beyond which pressure

-

reducing 

valves must be 

installed

.

The faucets are fitted with quarter

-

turn ceramic disc cartridges which 

provide a good flow rate with very smooth movement.

Before beginning installation 

, p

lease check for any damage that may 

have occurred during transport. 

Note: Damage 

c

laims cannot be 

made during or after installation.

IMPORTANT: Please read these instructions carefully before 

begin

ning

 and retain for future reference. These instructions have 

been prepared for your guidance, you must exercise due care at all 

times. 
We do not accept responsibility for any problems that may occur 

through incorrect installation.

Dimensions

Tools required

The installation must comply with all plumbing codes including local 

codes and be installed by a licensed plumbing contractor. 

WARNING! 

Before installing a new faucet it is essential that 

t

he supply 

pipes 

are thoroughly flushed 

in order to remove any remaining 

debris

solder or other impurities. Failure to carry out this simple procedure 

can cause problems or damage to the working of the faucet.

Installing shut-off valves on incoming supply lines is recommended 
for ease of maintenance. 

INSTALLATION: 

T

urn off the main water supply before connecting 

to any existing pipework or doing any maintenance.
WARNING! Please check for any hidden pipes and cables, electric 

or otherwise

,

 before drilling holes in a wall.

Reviews: