Installation Instructions
Adjustable
wrench
Channel
locks
Plumbers’ putty
or caulking
Flat head
screwdriver
Cross head
screwdriver
Hexagonal
key
Wall Outlets
US-ARC953
US-WF953
US-WL952
US-WL953
Introduction
Installation notes
The wall outlet has been fully inspected throughout the production
process and only leaves our factory after a 15
-
st
ep
QC process.
Carefully remove the wall outlet from the box and check that all parts
have been supplied.
Before beginning installation
,
please check for any damage that may
have occurred during transport.
Note: Damage claims cannot be
made during or after installation.
Improper installation shall result in loss of warranty in case of
damage caused by impacts or rubbing against rough surfaces.
Prior to installing the wall outlet
,
prepare a connection of water
inlet/outlet.
IMPORTANT: Please read these instructions carefully before
b
egin
ning
and retain for future reference.
We do not accept responsibility for any problems that may occur
through incorrect installation.
Dimensions
Tools required
The installation must comply with all plumbing codes including local
codes and be installed by a licensed plumbing contractor.
IMPORTANT
!
Before installing a new wall outlet it is essential that
the
supply pipes are thoroughly flushed in order to remove any
remaining
debris, solder or other impurities. Failure to carry out this simple
procedure can cause problems or damage to the working of the
wall outlet.
Installing shut-off valves on incoming supply lines is recommended
for ease of maintenance.
T
urn off the main water supply
before connecting to any existing
pipework or doing any maintenance.
WARNING! Please check for any hidden pipes and cables, electric
or otherwise
,
before drilling holes in a wall
or floor
.
US-ARC953
US-WL952
2" x
G1/2
"
1
-1/4"
1
-1/4"
1/
2-14
N
PT
1/
2-14
N
PT
1
-1/4"
Ø2
-3/8"
2"
G1/2
"
1/2"
1/2"
2"
US-WL953
G1/2
"
Ø2
-1/4"
1
-1/4"
7/8"
Ø1
-1/8"
1
-7/8"
1/
2-14
N
PT
1/2"
1/2-14NPT
2"
2
-3/8"
1
-1/4"
G1/2
"
2
-1/8"
US-WF953
