Installation Instructions
2
Tools You Will Need
Leyden Robe Hook
14-51
Installation Instructions
For eas
e of
installation
you wi
ll need:
● To read the installation
instructions
completely before
beginning.
● To read all warnings, care, and maintenance information.
Flat Head Screwdriver
Pencil
Drill
Philips Screwdriver
Level
14-51-PC
14-51-SN
14-51-PN
14-51-BZ
1
Determine the location of the robe
hook.
Align bracket and mark drill
holes in desired location
Drill 1/4" holes in marked locations
Drive the wall anchors into the
drilled holes with a Phillips
screwdriver.
Place the mounting bracket over
the wall anchors. Secure it to the
wall using the supplied screws.
Temporarily place the robe hook on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
bracket.
Place robe hook on the mounting
brackets. Secure it to the wall using
the bottom set screw.
Before beginning installation, check for any
damage that may have occurred during transport.
Note: Damage claims cannot be made during or
after installation.