9
Part 4: Frequent Cam Q&A
Why Dash Cam saying SD Card full? / Dash Cam turn off randomly?
When the dash cam saying " SD card FULL", the dash camera will turn off
randomly, which is to remind you format card and need reset the dash
cams. As the
gravity sensor
is sensitive (in order to protect you to save
important videos), if you are driving on a relatively bumpy road, the
camera may think there is an accident and lock some videos. These
locked videos
will not be deleted
by the loop recording function.
Therefore we recommend:
1.Turn off G sensor, or set G-sensor: Low
2.Turn off motion detection and parking function when you are driving.
3.These two functions will cause the dash cam turn off and turn on when
you driving.
Regularly format SD Card every 15 days.
SD card life-span is short. We recommend you can change a new card,
which has large capacity.
Unable to read storage and can't find the connection device.
1.Change to another USB cable and check whether there is something
wrong with the cable.
2.Connect the camera to different computers because some computer
systems will prevent the external devices.
How parking monitoring works? What should I do If I want to have
permanently parking function? I know that the built-in battery has a
low capacity.
1.If you turn on parking function, the camera will automatically turn on
when detects unusual vibration and start recording 30 seconds then auto
shut off.
2.If you want to achieve long time parking function, please use hardwire
kit. A 12V hardwire kit can power your dash cam all the time, and will
record when your car is parked.
The specification of hard wire kit needed:
Mini USB port, Voltage:12-24V,
Output voltage and current:5V, 2A
