User Manual and Reference Handbook for the CC Pilot™ XL
Touch screen
The CC Pilot™ XL can as an option be fitted with a touch screen which gives the
opportunity to provide a very easy-to-use HMI (Human Machine Interface) for the user.
Double and right click on the touch screen
To perform the equivalent to a right click on the touch screen first tap the place where
the right click is supposed to be pressed and then tap the screen again slightly to the
side of the initial tap.
To perform a double click on the touch screen, tap the screen twice in the same place.
Calibration of touch screen
If needed the touch screen can be calibrated. Calibration is started manually via the
CCP Settings application. To keep the calibration data the administrator login must be
done in CCP Settings.
Be thorough with this calibration so that your touch screen will have the best possible
performance. You should use the same object (finger, stylus) during calibration which
you think you will use later.
Don’t use sharp or pointed objects on the touch screen since these can damage or
scratch it, which can seriously degrade its functionality.
9
