Appendix F. Node Mounting
Doc.#6000-0015 Rev: A
Page 64
Appendix F. Node Mounting
Mounting Plate
The MP100 Mounting Plate, shown in Figure F1, is designed for use with
the CN1100 Node. The MP100 mounts to structure by means of screws in
its four corners and has two protruding, grooved studs to hold the Node.
The backside of the Node (and the backside of the battery pack, if used) has
two slots with a central hole to fit over the studs. Once the studs are in the
holes and the slots align with the groove depth, the Node is secured by
sliding it away from the center hole.
Figure F1. MP100 Mounting Plate
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]
