Appendix D. PC Radio
Doc.#6000-0015 Rev: A
Page 59
Appendix D. PC Radio
Crossbow PC Radio Package
•
AN100 Antenna
•
BT110 PC Radio
•
PS200 AC to DC Wall Plug-in Power Supply
•
RS-232 Cable and USB adapter
The BT110 PC Radio with the AN100 Antenna attached is shown in Figure
D1.
Installation
When PC ComWare is installed in the host computer, it installs the driver,
WinHub, for the BT110 PC Radio.
The BT110 PC Radio requires DC power from a DC source such as the
PS200 AC to DC Wall Plug-in Power Supply, a nominal 5 VDC @ 350
mA.
By default, the BT110 PC Radio connects to a free RS-232 port on the host
PC by means of a standard RS-232 cable with a 9-pin female connector on
one end and a 9-pin male connector on the other end. Alternatively, a USB
port may be used with the included USB adapter. For a laptop computer, a
PCMCIA adapter must be used. Refer back to Table 1.
Figure D1. BT110 PC Radio
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]
