Software Overview
Doc.#6000-0015 Rev: A
Page 36
Displaying Data on the PC
There are two ways to display measurements:
1. Sensor output data is displayed as an amplitude-versus-time plot
on the Sensors Display screen, Figure 28, for each sensor channel
checked as active on the Measurement Setup screen (see
Active
Channels
).
2. Figure 29 shows the Nodes Summary screen, where data is
displayed in the Value column, one measurement at a time in real
time by clicking on the Start/Stop button. The Nodes Summary
screen is displayed by clicking on the button labeled Table on the
Main screen or the Node Summary button on the toolbar.
Figure 28. Sensors Display Screen with Two Active Sensors
The control buttons and boxes on the Sensors Display Screen are
summarized in Table 9.
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]
