© 2006 Cronyx
11
Section 2. Installation
Section 2. Installation
2.1. Installation Space Requirements
When installing the multiplexer, allow for at least 10 cm of free space at the front of
device for interface cable connections.
The ambient temperature must be 0 to +50 °С, with humidity of up to 80 %,
non-con-
densing
.
2.2. Delivered Items
The FMUX unit of the corresponding design ......................................................1 pc.
Bracket for mounting FMUX unit in 19" rack .....................................................2 pcs.
Self-adhesive foot for FMUX unit ..........................................................................4 pcs.
Power supply cable
(for "-AC" model)
....................................................................1 pc.
Removable part of power supply connector terminal unit
(for "-DC" model)
.1 pc.
Installation and Operations Manual ......................................................................1 pc.
2.3. Cable Connections
All connectors are located on the front panel of multiplexer:
LERR LOS
RERR TST
PWR
SNMP
CONSOLE
ALARM
0
1
2
3
Alarm
Console
E1 ports
Power
Ground
SNMP port
Link port
(V.35/RS-530/RS-449)
PORT
FMUX
Fig. 2. Connector locations
Summary of Contents for FMUX/SAT
Page 43: ...2006 Cronyx 43...
