5
TYPE OF WATER
If any liquid contains stringy or large material that may cause obstruction, a suction
strainer should be used. If the pump is needed for chemicals, you must check the pump
compatibility with your local dealer.
FIXED INSTALLATIONS
In some installations and only if the pump is used under stressful conditions, such as
pumping uphill for long distances, the pump may not work on start up.
To rectify this, a check valve should be installed between the pump and the pipe and a
gate valve should be installed on the pump discharge. If it still fails, open the valve to
release a full flow of water and close it again. It should now pump fully. Under some
conditions the procedure might have to be repeated at each start up.
STORAGE
•
Make sure that the engine is completely cooled off before storage.
•
Clean up oil and dust accumulation on rubber parts.
•
Drain pump completely of all water.
•
Cover the machine and store it in a dry place.
•
For long-term storage of this petrol unit, remove fuel from the fuel tank. Also remove
fuel remaining in the fuel line and chamber of the carburettor. To drain fuel from the
chamber of the carburettor, remove the drain plug provided at the chamber and drain
the fuel.
WARRANTY
Consult the Crommelins Machinery Warranty Information leaflet, supplied with your new
product, for details of your machinery warranty including consumer advice and
information about accessing a service agent to repair your product. You can also visit our
website at www.crommelins.com.au to find your local service agent who will be able to
assist with all warranty claims.
