2.2 - ADDING ENGINE OIL - Check oil levels are at the
correct level.
i. Place the engine on a level surface.
ii. Remove the dipstick and wipe it clean.
ii. Reinsert and check the dipstick for oil level.
!
CAUTION: Reinstall dipstick into tube; rest on oil
fill neck, DO NOT thread cap into tube.
iv. Add the recommend oil to the upper limit of the
dipstick.
2.3 - CHANGING OIL - If the oil is dirty, replace with new
oil.
!
CAUTION: Change oil when the engine is warm
from operation.
i. Place the engine on a level surface.
ii. Prepare a tray to catch the oil.
iii. Remove the oil drain plug and allow the oil to drain
completely.
iv. Replace and fully tighten the drain plug.
v. Add recommended oil to the upper limit.
vi. Reinstall and fully tighten the dipstick.
vii. Dispose of used oil at an approved waste
management facility.
Pg. 18
