CRITTER & GUITARI - Kaleidoloop Manual
The Critter & Guitari KALEIDOLOOP is a social, portable sound collector. It’s designed to be taken
anywhere and everywhere to gather and manipulate all kinds of sounds. Record sounds from your
kitchen, the recording studio, and campfire jam. The KALEIDOLOOP lets you sample and tweak!
Updated May 1 2012
™
™
This is the layout for the control surface of the KALEIDOLOOP:
The reference sticker on the bottom of the Kaleidoloop looks like this:
1
POWER
SWITCH
LINE OUT
(MONO)
LINE IN/MIC IN
(MONO)
9VDC
VOLUME
BACK
STATUS LED
SD CARD
FWD
STEPPED/CONTINUOUS
MODES TOGGLER
( )
RECORD/PLAY
SPEED &
DIRECTION
On power up, the STATUS LED flashes up to four times
to indicate how full memory card is:
0 - 25% full
25 - 50% full
50 - 75% full
75 - 100% full
If there is a problem, the STATUS LED will repeatedly
flash one of these patterns:
© 2012. All Rights Reserved. Philadelphia, USA.
KALEIDOLOOP
CRITTER & GUITARI
www.critterandguitari.com
ZERO ONE - No Worries!
No SD card or error: Try inserting new card.
Problem with SD card. Try reformatting it.
Erase SD Card
To ERASE/FORMAT card, turn off device, hold down
Record/SkipFWD/SkipBKWD buttons while turning
device on. LED will flash 3 times, pause, and flash 3
times again. It is now ready for recording.
The SPEED & DIRECTION knob controls tuning. In STEPPED
MODE ( ), playback steps along the following divisions.
As the playback speed increases, so will brightness of LED.
For more information on KALEIDOLOOP, please visit:
www.critterandguitari.com/kaleidoloop
𝄞
𝄢
𝄞
𝄢
FORWARDS
BACKWARDS
TM
TM
⥋
POWER
SWITCH
LINE OUT
(MONO)
LINE IN/MIC IN
(MONO)
9VDC
VOLUME
BACK
STATUS LED
SD CARD
FWD
STEPPED/CONTINUOUS
MODES TOGGLER
( )
RECORD/PLAY
SPEAKER
SPEED &
DIRECTION
⥋
