
© 2021 All rights reserved. Data subject to change without notice.
7
Rev. B | 2021.08
cGas Detector Analog Transmitter - Installation Manual
may contact the distributor from whom it was purchased, or you may contact
CETCI directly.
Prior to shipping equipment to CETCI, contact our office for an RMA #. All
returned goods, regardless of reason, must be accompanied with an RMA
number. Please read our Warranty and Returns Policy and follow our RMA
Instructions and Form.
If the product is deemed repairable, for liability reasons, CETCI will perform all
necessary repairs to restore the instrument to its full operating condition.
1.4 Copyrights
This manual is subject to copyright protection; all rights are reserved. Under
international and domestic copyright laws, this manual may not be copied or
translated, in whole or in part, in any manner or format, without the written
permission of CETCI.
Modbus® is a registered trademark of Gould Inc. Corporation.
BACnet® is a registered trademark of American Society of Heating,
Refrigeration and Air Conditioning (ASHRAE).
1.5 Disclaimer
Under no circumstances will CETCI be liable for any claims, losses or damages
resulting from or arising out of the repair or modification of this equipment
by a party other than CETCI service technicians, or by operation or use of the
equipment other than in accordance with the printed instructions contained
within this manual or if the equipment has been improperly maintained or
subjected to neglect or accident. Any of the forgoing will void the warranty.
Under most local electrical codes, low voltage wires cannot be run within the
same conduit as line voltage wires. It is CETCI policy that all wiring of our