52
5
T
ECHNICAL SPECIFICATIONS
12V-16A, 12V-25A, 24V12A
Part Number
YPO12-16STPL/(OEPL)
YPO12-25STPL/(OEPL)
YPO24-12STPL/(OEPL)
Model
12V/16A
12V/25A
24V/12A
recommended battery bank*
100-200Ah
200-300Ah
100-200Ah
Input
Voltage
from 90 to 265VAC single-phase automatic
Frequency
from 47 to 65Hz automatic
Input current consumption 230/115VAC
1.1/2.2A
1.7/3.4A
1.7/3.4A
Recommended power for a generator
280W
435W
420W
Power factor
1
Efficiency
Greater than 90%
Input fuses
T6.3A/250V - SCHURTER Réf. 0001.1032 (F101)
Output
Number of battery banks
3 separate positive terminals : +BAT E, +BAT 1 et +BAT 2 (integrated Mosfet splitter )
1 -BAT negative terminal
Each bank can be used individually and delivers the rated current
Nominal current (+/-7%) / Rated Power
16A/228W
25A/356W
12A/342W
Charging curve
IU or IUoU through internal push-button, Bluetooth or CAN-Bus
(Boost, Absorption, Floating and Refresh)
Battery type
Lead sealed as factory setting - Gel, AGM, calcium lead, LiFePO4, DC power-supply mode, etc.
Specific request on demand
Boost voltage
14.4VDC for lead sealed battery (factory setting)
28.8VDC for lead sealed battery
(factory setting)
Floating voltage
13.8VDC for lead sealed battery (factory setting)
27.6VDC for lead sealed battery
(factory setting)
Regulation tolerance before output Mosfet
splitter and fuse
< 2% (at rated conditions)
Peak to peak ripple and noise
< 2% (at rated conditions)
Automotive output fuse mounted in series
in minus pole -BAT
1 x 20A/32V (F400)
1 x 30A/32V (F400)
1 x 15A/32V (F400)
Environment
Cooling
fanless
Sound level
0dB SPL
Operating temperature at 230VAC
From -20°C to +60°C, derating above 60°C. Outside the operating ranges -20°C +65°C automatic
shutdown. Automatic restart within operating ranges.
Storage temperature
From -20°C to +70°C
Relative humidity
up to 70% (95% without condensation)
Casing
Material
Casing comprises 3 parts: Aluminium sink frame / Thermoplastic body / Aluminium clasp
Dimensions (length, height, depth) / Weight
236 x 180 x 96 mm / 3.54kg
Fixing center distance
272 x 170 mm
Fixing screw (wall)
4 x M5 round head screws
Protection factor
IP22
PCB protection
Water-repellent varnish (marine environment)
Standards
CE declaration of conformity
Available on request
CE / EMC MARK
EN61204-3
CE / Security MARK
EN60335-2-29, ISO8846
Protections
- Against transient input overvoltage by varistor (out of warranty)
- Against output polarity inversions by fuse (replaceable automotive type)
- Against short-circuits and output overloads
- Against abnormal overheating by charger cut-off (automatic restart)
Communication
CANBUS (according to models) / Bluetooth as standard (optional on OE version)
Options
Temperature probe / Bluetooth dongle (OE versions)
*Recommended battery capacity for lead type batteries, ratio C/10. Consult us for lithium batteries capacity
