Fermod Floor Guided Sliding Door Hardware Kits -
F2156 Installation Guide
www.crh.com.au
12
Step 6.
Cutting the main rail to length.
The main rail length must be double the door blade with plus an
additional 220mm.
“X” equals the total door blade width.
Example: If the total door blade width is 1600mm, the main rail
should be 3420mm. (1600 x 2 + 220).
Step 7.
Cutting the running profile to length.
2 x running profiles cut to length are
required.
The running profile must be equal to the door blade width less
45mm.
“X” equals the total door blade width.
Example: If the total door blade width is 1600mm, 2 lengths need
to be cut at 1555mm. (1600 - 45)
