Crestron UC-PHONE-T Supplemental Manual Download Page 59

Page: 59 / 62

Supplemental Guide – DOC. 8413A

UC-PHONE-T & UC-PHONE-T-PLUS

•

Voicemail

Tap Voicemail to show the Voicemail screen. The Voicemail screen displays the recorded

voicemail messages and playback controls on the left side of the screen and the contact

details for the selected voicemail message on the right side of the screen.

•

To navigate the list of voicemail messages, drag up or down on the left side of

the screen to scroll through the list of messages.

•

Tap a message to display playback controls and message transcription (if

available). The caller’s contact information is displayed on the right side of the

screen.

Voicemail controls

Play/pause

Speaker/Handset View contact details

Change playback speed

Call the contact

Delete Message

Summary of Contents for UC-PHONE-T































































Search results

Summary of Contents for UC-PHONE-T

Reviews:

Related manuals for UC-PHONE-T

Brands by name

Popular brands

Crestron UC-PHONE-T, Supplemental Manual

Search results

Summary of Contents for UC-PHONE-T

Reviews:

Related manuals for UC-PHONE-T

Brands by name

Popular brands