Crestron UC-P100-S Supplemental Manual Download Page 98

Page: 98 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Create new common configuration files by performing the following steps:

Create <y0000000000xx>.cfg files by using the Common CFG file from the

distribution as templates.

Edit the parameters in the file as needed.

Copy configuration files to the home directory of the provisioning server.

Reboot phones to trigger the auto provisioning process.

Skype for Business phones discover the provisioning server address, and then download

the configuration files from the provisioning server.

For more information on configuration files, refer to “Configuration Files” on page 85.

During the auto provisioning process, the phone supports the following methods to

discover the provisioning server address:

•

DHCP: DHCP option can be used to provide the address or URL of the

provisioning server to phones. When the phone requests an IP address using the

DHCP protocol, the resulting response may contain option 66 or the custom

option (if configured) that contains the provisioning server address.

•

Static: The server address can be manually configured via phone user interface or

web user interface.

For more information, refer to the UC-PHONE Auto Provisioning Desk Phones for

Microsoft® Teams and Skype® for Business Supplemental Guide (Doc. 8368).

Upgrade Firmware

The phone supports three methods to upgrade phone firmware:

•

Upgrade firmware via the web user interface: Download firmware in ROM

format, and upload it to the phone via web user interface. This method can

deploy a single phone.

•

Upgrade firmware from the provisioning server: Download firmware in ROM

format, and use the centralized provisioning method to upgrade the firmware.

This method requires setting up a provisioning server, and uses configuration files

to provision the phone.

•

Upgrade firmware from the Skype for Business Server: Download firmware in

CAB file format, and place the firmware on Skype for Business Server to

provision the phone.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands