Crestron UC-P100-S Supplemental Manual Download Page 293

Page: 293 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

285

Select Enabled or Disabled from the Voice Mail Tone drop-down list.

Click Confirm to accept the change.

Headset Prior

The Headset Prior feature allows users to use headset preferentially if a headset is

physically connected to the phone. This feature is especially useful for permanent or full-

time headset users.

Headset prior can be configured using the configuration files or locally.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure headset prior.
Parameter:

features.headset_prior

Local

Web User Interface

Configure headset prior.

Navigate to:
http://<phoneIPAddress>/servlet?p=feat
ures- general&q=load

Details of the Configuration Parameter

Parameter

Permitted Values

Default

features.headset_prior

0 or 1

Description:

Enables or disables preferential use of headset mode for all incoming calls and outgoing calls.

Disabled, the headset mode can be deactivated by pressing the speakerphone key or the

HEADSET key except the HANDSET key.

Enabled, the headset mode will not be deactivated until the user presses the HEADSET key

again.

Web User Interface:

Features > General Information > Headset Prior

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands