Crestron UC-P100-S Supplemental Manual Download Page 24

Page: 24 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Tap 2. IPv4.

Tap the value in the 2. Static DNS field, and then select Enabled from the drop-

down list.

Enter the DNS server addresses in the Pri. DNS and Sec. DNS fields.

Tap Save.

DHCP Option

DHCP provides a framework for passing information to TCP/IP network devices.

Network and other control information are carried in tagged data items that are stored

in the options field of the DHCP message. The data items themselves are also called

options.

DHCP can be initiated by simply connecting the phone with the network. Skype for

Business phones broadcast DISCOVER messages to request the network information

carried in DHCP options, and the DHCP server responds with specific values in

corresponding options.

The following table lists common DHCP options supported by phones.

Parameter

DHCP Option

Description

Subnet Mask

Specify the client’s subnet mask.

Time Offset

Specify the offset of the client's subnet in seconds from

Coordinated Universal Time (UTC).

Router

Specify a list of IP addresses for routers on the client’s subnet.

Time Server

Specify a list of time servers available to the client.

Domain Name

Server

Specify a list of domain name servers available to the client.

Log Server

Specify a list of MIT-LCS UDP servers available to the client.

Host Name

Specify the name of the client.

Domain Server

Specify the domain name that client should use when

resolving hostnames via DNS.

Broadcast

Address

Specify the broadcast address in use on the client's subnet.

Network Time

Protocol Servers

Specify a list of NTP servers available to the client by IP

address.

Vendor-Specific

43 (vendor class ID:CPE-

OCPHONE)

Specify virtual local area network (VLAN) ID.

Information

43 (vendor class ID: MS-

UC-Client)

Specify Skype for Business Server pool certificate provisioning

service URL.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands