Crestron UC-P100-S Supplemental Manual Download Page 21

Page: 21 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

Tap Save.

Static DNS

Static DNS address(es) can be configured and used even though DHCP is enabled.

Static DNS can be configured using the configuration files or locally.

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the static DNS feature.
Parameter:

static.network.static_dns_enable

<MAC>.cfg

Configure static DNS address.
Parameters:

static.network.primary_dns

static.network.secondary_dns

Local

Web User Interface

Configure the static DNS feature.

Configure static DNS address.

Navigate to:
http://<phoneIPAddress>/servlet?p=networ
k&q=load

Phone User Interface

Configure the static DNS feature.
Configure static DNS address.

Details of the Configuration Parameters

Parameter

Permitted Values

Default

static.network.static_dns_enable

0 or1

Description:

Triggers the static DNS feature to on or off.

Off, the phone will use the IPv4 DNS obtained from DHCP.

On, the phone will use manually configured static IPv4 DNS.

Note: This feature works only if the value of the parameter “static.network.internet_port.type” is

set to 0 (DHCP). If the parameter is changed, the phone will reboot to make the change take

effect.

Web User Interface:

Network > Basic > IPv4 Config > Static DNS

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > WAN Port > IPv4 > Type

(DHCP) > Static DNS

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands