Crestron UC-P100-S Supplemental Manual Download Page 102

Page: 102 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Parameter

Permitted Values

Default

static.auto_provision.weekly.end_time

Time from 00:00 to 23:59

00:00

Description:

Configures the end time of the day for the phone to perform an auto provisioning process weekly.

Auto provisioning will not be performed after the end time.

Note: This feature works only if the value of the parameter “static.auto_provision.weekly.enable”

is set to 1 (On).

Web User Interface:

Settings > Auto Provision > Time

Phone User Interface:

None

static.auto_provision.weekly.dayofweek

0, 1, 2, 3, 4, 5, 6 or a

combination of these digits

0123456

Description:

Configures the days of the week for the phone to perform an auto provisioning process weekly.

Sunday

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Example:

static.auto_provision.weekly.dayofweek = 01

The phone will perform an auto provisioning process every Sunday and Monday.

Note: This feature works only if the value of the parameter “static.auto_provision.weekly.enable”

is set to 1 (On).

Web User Interface:

Settings > Auto Provision > Day of Week

Phone User Interface:

None

static.firmware.url

URL within 511 characters

Blank

Description:

Configures the access URL of the firmware file.

Example:

static.firmware.url = http://192.168.1.20/66.9.0.30.rom

Note: If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Settings > Upgrade > Select and Upgrade Firmware

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands