
The Crestron®
and
are room availability light
bars for TSW-770 and TSW-1070 series touch screens. The light bars
provide a 180° visual indication of a room’s availability status, illuminating
green if the room is available and red when reserved, with options for
custom color mixing and programming.
NOTE:
The TSW-770-LB and TSW-1070-LB are functionally similar. For
simplicity within this document, the term "light bar" is used to refer to
both the TSW-770-LB and TSW-1070-LB unless otherwise noted.
In the Box
1
TSW-770-LB or TSW-1070-LB, Room Availability Light Bar
Additional Items
2
Screw, M2 x 12 mm, Pan Head, Phillips (2055946)
TSW-770-LB-B-S Only
1
Light bar, 7 inch, Black (4531348)
TSW-770-LB-W-S Only
1
Light bar, 7 inch, White (4531347)
TSW-1070-LB-B-S Only
1
Light bar, 10 inch, Black (4531350)
TSW-1070-LB-W-S Only
1
Light bar, 10 inch, White (4531349)
Install the Light Bar
The following procedures describe how to install the light bar in a typical
wall mount installation.
If installing the light bar with the TSW-770/1070-MUMK mullion mount
kit, refer also to the
TSW-770/1070-MUMK Quick Start (Doc. 8653)
.
Attach the Light Bar Assembly
To attach the light bar assembly to the touch screen rear housing:
1. If the light bar is being added to an existing touch screen installation,
pull the touch screen carefully out its mounting bracket and
disconnect the Ethernet cable.
NOTE:
If the touch screen is secured to the mounting bracket with a
security bracket, refer to the removal procedure described in the
TSW-570, TSW-770, and TSW-1070 Quick Start (Doc. 8552)
.
2. Use the two included M2 x 12 mm screws to attach the light bar
assembly to the rear of the touch screen.
1
TSW-770-LB and TSW-1070-LB
Quick Start
Room Availability Light Bar for TSW-70 Series