Video Card for TPS/Lectern Panel
Crestron
TPS-VIDL-1/TPS-VIDL-2
The TPS-VIDL-1 can automatically detect composite or S-video. The
TPS-VIDL-2 adds input for a second composite video source (on the
TPS-VIDL-2, Composite/S-Video can be auto-detected only when input
signal 2 is not used). When using the TPS-VIDL-2 for receiving two
video sources, the “Comp/Y” connection will be used for Composite
Video Source 1 while the chroma (C) connection will be used for
Composite Video Source 2.
Specifications
The table below provides a summary of specifications for the
TPS-VIDL-1 and TPS-VIDL-2 cards.
Specifications of the TPS-VIDL-1/VIDL-2
SPECIFICATION DETAILS
Power Requirements
TPS-VIDL-1:
7 Watts (0.29 Amp @ 24 VDC)
TPS-VIDL-2:
12 Watts (0.50 Amp @ 24 VDC)
Control System Update Files
1,2,3
2-Series Control System
Version C2-2004.CUZ or later
CEN/CN-TVAV
Version 5.12.63v.UPZ or later
CNMSX-AV/PRO
Version 5.12.63x.UPZ or later
CNRACKX/-DP
Version 5.12.63w.UPZ or later
ST-CP
Version 4.02.4S.UPZ or later
Isys™ Touchpanel Firmware
4
Version 1.018 or later
VT Pro-e Programming
Software
1
Version 3.0.0.8 or later
Video Types
NTSC or PAL
Video Formats
Composite or S-Video
Video Format Detection
Within 2 seconds
Operating Temperature and
Humidity
50º to 113º F (10º to 45º C), 10
to 90% Relative Humidity (non-
condensing)
(continued on next page)
2
•
Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2
Operations & Installation Guide - DOC. 6070
