Video Card for TPS/Lectern Panel
Crestron
TPS-VIDL-1/TPS-VIDL-2
can be obtained from the Downloads | Product Manuals section of the
Crestron website (www.crestron.com).
Setup
Configuring the Touchpanel
NOTE:
Refer to the latest revision of the TPS-4500L, TPS-5000L, or
TPS-6000L Operations & Installation Guide (Doc. 5891, 5825, or 5783,
respectively) for instructions to access the touchpanel setup screen. The
latest version of the operations guide can be obtained from the
Downloads | Product Manuals section of the Crestron website
(www.crestron.com).
1. From the MAIN MENU, select the
SETUP
button to access the
touchpanel SETUP MENU.
SETUP MENU (TPS-VIDL-1 shown)
NOTE:
If the TPS-VIDL-1 is installed, a single “Video” button will be
displayed. If the TPS-VIDL-2 is installed, buttons labeled “Video 1” and
“Video 2” will be displayed instead of the single “Video” button.
NOTE:
If the video card is not properly installed, the “Video” button(s)
will not be displayed.
12
•
Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2
Operations & Installation Guide - DOC. 6070
