Crestron
TPS-ENET
Ethernet Card for TPS/Tilt Panel
Ethernet Card for TPS/Tilt Panel:
TPS-ENET
Introduction
Features and Functions
The TPS-ENET Ethernet card is an optional feature designed for
Crestron’s Isys
®
TPS-5000 and TPS-6000 tilt touchpanels. The card
provides communication via Ethernet/local area network (LAN) and wide
area network (WAN) to any Crestron
®
Internet protocol (IP) control
device. Adding Ethernet capabilities into the touchpanel via SIMPL
Windows allows remote diagnostics and upgrades, access to Crestron’s
network analyzer, and the ability to activate any device connected to the
Crestron remote control system (herein referred to as the Cresnet
®
system). The TPS-ENET also allows a TPS touchpanel to communicate
through Ethernet with multiple control systems. Refer to “Ethernet
Setup” on pages 13-15. For additional information, refer to the “Ethernet
Touchpanels” and “IP Table Setup” sections of the latest revision of the
Crestron e-Control Reference Guide (Doc. 6052). The latest version can
be obtained from the Downloads | Product Manuals section of Crestron’s
website (
.
Functional Summary
Provides Ethernet communication for a TPS touchpanel
10BaseT or 100BaseT, half or full duplex networking
Supports several protocols including TCP/IP, UDP/IP, etc.
Operations & Installation Guide - DOC. 6016
Ethernet Card for TPS/Tilt Panel: TPS-ENET
•
1
