Crestron
TPMC-V12/15
V-Panel™ Integrated 12” & 15” Touch Screens
Tilt Tension Adjustment
Tilt tension on the TPMC-V12 and TPMC-V15 is preset at the factory to allow the
screen to be tilted anywhere within its 35 degree tilt range and maintain its position
during use. To tighten tilt tension or to fix the screen at a given tilt position, use the
three Allen screws accessed through the hole in the touch screen base, as shown in
the following illustration.
Position of Allen Screws for Tilt Tension Adjustment
Allen Screws for
Tilt Tension Adjustment
Recommended Cleaning
Keep the surface of the touch screen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touch screen. Wipe touch screen clean and avoid getting moisture
beneath the bezels.
Operations Guide – DOC. 6940B
V-Panel™ Integrated 12” & 15” Touch Screens: TPMC-V12 & TPMC-V15
•
49
