Crestron
TPMC-12
Isys
i/O
®
Tilt Touchpanel Media Center
connectors. Alternatively, use a CAT5 crossover cable to connect the two
LAN
ports directly without using a hub or router.
4. Use the Address Book in Crestron Toolbox to create an entry for the
TPMC-12 with the TPMC-12’s TCP/IP communication parameters.
5. Display the “System Info” window (click the
icon) and select the
TPMC-12 entry.
Programs, Projects and Firmware
Program, project or firmware files may be distributed from programmers to installers
or from Crestron to dealers. Firmware upgrades are available from the Crestron
website as new features are developed after product releases. One has the option to
upload programs and projects via the programming software or to upload and
upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer to
the SIMPL Windows help file, VT Pro-e help file or the Crestron Toolbox help file.
SIMPL Windows
If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.
VisionTools Pro-e
Upload the VT Pro-e file to the touchpanel using VT Pro-e or Crestron Toolbox.
Firmware
Check the Crestron website to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
Upgrade TPMC-12 firmware via Crestron Toolbox.
1. Establish communication with the TPMC-12 and display the “System Info”
window.
2. Select
Functions | Firmware…
to upgrade the TPMC-12 firmware.
Program Checks
Actions that can be performed on the TPMC-12 vary depending on whether it is
connected via Cresnet or Ethernet.
Cresnet Connections
For Cresnet connections, using Crestron Toolbox, display the network device tree
(
Tools | Network Device Tree
) to show all network devices connected to the control
system. Right-click on the TPMC-12 to display actions that can be performed on the
TPMC-12.
Ethernet Connections
For Ethernet connections, display the “System Info window (click the
icon) and
select the
Functions
menu to display actions that can be performed on the
TPMC-12.
Be sure to use Crestron Toolbox to create the TPMC-12 IP table.
1. Select
Functions | IP Table Setup
.
2. Add, modify or delete entries in the IP table. The TPMC-12 can have only
one IP table entry.
3. A defined IP table can be saved to a file or sent to the device.
Edit the control system’s IP table to include an entry for the TPMC-12. The entry
should list the TPMC-12’s IP ID (specified on the TPMC-12’s IP table) and the
internal gateway IP address 127.0.0.1.
Operations Guide – DOC. 6675A
Isys i/O
®
Tilt Touchpanel Media Center: TPMC-12
•
57
